home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
logs
/
logbook
/
contest.doc
< prev
next >
Wrap
Text File
|
1990-01-12
|
23KB
|
518 lines
PC-HAM CONTEST.DOC Version 3.3 PAGE 1
CONTEST Version 3.3
G3ZCZ AMATEUR RADIO CONTEST PACKAGE VERSION 3.3
(C) Copyright 1985, 1986, 1987, 1988, 1989, 1990
All Rights Reserved
By Joe Kasser G3ZCZ
POB 3419,
Silver Spring,
Md., 20918, USA.
CONTEST is part of PC-HAM, a set of DATA Processing Amateur Radio
programs for the user of a microcomputer in Amateur Radio. The
BASIC language programs may or may not be described in or be
based on programs described in the book, SOFTWARE FOR AMATEUR
RADIO written by Joe Kasser, G3ZCZ, published by TAB Books
(Number 1560), Blue Ridge Summit, Pa., 17214, and available from
the author. The DBASE3 programs perform database operations on
logbook information.
PC-HAM is written and supported by Joe Kasser, G3ZCZ.
The program is distributed as a Shareware product. You may freely
copy and share the product with your friends, associates and
other radio hams. If you decide to use the product, you are asked
to become a registered user by sending a QSL card and a contri-
bution to the author (suggested amount of $36.50 (ie. half of
73) or equivalent in foreign currency (See registration form
below).
The contribution covers the cost of distribution of the updated
disk, and supports the continual development of "Software for
Amateur Radio". Upon receipt of your contribution, you will
receive one free update disk ), mail (electronic and regular)
support, and notice of further releases. The update disk will
contain any new versions of the software on this disk plus new
software, accompanying the series of articles currently being
written on the applications of data processing concepts of micro-
computers to amateur radio.
Under no circumstances may this product be sold or distributed
with another product without the express written permission of
Joe Kasser, G3ZCZ.
Joe Kasser, G3ZCZ will only support unmodified copies of this
software. Your comments and suggestions for changes are however
welcome. If you are the first to suggest a change that is imple-
mented, you will be sent a complimentary copy of the disk with
the change incorporated.
PC-HAM CONTEST.DOC Version 3.3 PAGE 2
TABLE OF CONTENTS
1.0 INTRODUCTION
2.0 DURING THE CONTEST
3.0 COMMANDS
3.1 GRAB (Function Key 1)
3.2 Band (Function Key 2)
3.3 CALL (Function Key 3)
3.4 *QRT (Function Key 4)
3.5 RPT RX (Function Key 5)
3.6 Fudge (Function Key 6)
3.7 XMT RPT (Function Key 7)
3.8 /PX CHK (Function Key 8)
3.9 LOG (Function Key 9)
3.10 +MORE (Function Key 10)
3.11 WATTS (Function Key 1)
3.12 MODE (Function Key 2)
3.13 ?CLN (Function Key 3)
3.14 PRINT (Function Key 4)
3.15 OOPS (Function Key 5)
4.0 AFTER THE CONTEST
5.0 SAMPLE DISK FILES
1.0 INTRODUCTION
Contests are a natural application of computers in amateur
radio. After all the purpose of a contest can be stated as
gathering data (the calls and reports of stations worked) in
such a way as to avoid duplicates. When working contests in a
manual (non computer) mode, if you desire to avoid dupli-
cates, you usually have to keep two sets of records for each
contact. The log entry has to be made, and a duplicate sheet
of some kind has to be kept to give real time notice of poten-
tial duplicate contacts.
The use of a good contest logging program simplifies the paper
work during and after a contest and allows the operator to
concentrate on working stations.
During the contest, the operator has only to perform the follow-
ing tasks.
* Enter the call sign of the station worked.
PC-HAM CONTEST.DOC Version 3.3 PAGE 3
* Enter the report received.
* Tell the computer to log the contact.
The computer takes care of the rest of the data handling. The
computer thus performs the following tasks.
* Keeps a check list in memory to notify the operator if a
contact has been made on the same (duplicate) or an other
band.
* Updates date and time information automatically.
* Stores the contact data in a floppy disk file.
Two versions of the program are provided on this disk as
described below.
CONTEST.BAS The source code for GWBASIC or the BASIC
interpreter.
CONTEST.TB A later version, updated, modified and colorized.
This version has been converted to Borland's Turbo
Basic. You may customize the colors by editing and
recompiling the program.
CONTEST.EXE Compiled version of CONTEST.TB. Run this one.
2.0 DURING THE CONTEST
The contest program on this disk maintains the check list for
duplicates in memory, logs all contacts to disk and can if de-
sired print a running log of contacts and/all callsigns to the
printer as the contest progresses. This print operation is
desirable in case of a power failure, or operator error in which
a contact was not logged by mistake. The program also maintains
a stack of callsigns. Each time you enter a call sign it is
placed on the top of the stack. You may grab the call of the
stack later as long as it is still in the stack.
BEFORE YOU DO ANYTHING ELSE, SET THE CAPITALS KEY SO THAT ALL
CHARACTERS ARE ENTERED IN CAPITAL LETTERS.
The program is invoked by typing the word CONTEST.
When the program begins, a sign on message such as that shown
below will appear.
G3ZCZ CONTEST LOGGING PROGRAM VERSION 3.3
IF TIME IS NOT SET TO UTC, STOP NOW AND SET THE CLOCK IN DOS
At this time, if the clock has not been set to UTC before you
PC-HAM CONTEST.DOC Version 3.3 PAGE 4
loaded the program, break the sequence and return to DOS to set
the date and time to the correct UTC values.
You will then be requested to give the computer the name of the
file you wish be the log. The computer checks the disk to see if
the file exists. If it does, the computer will load the data in
it into the check list, and display the calls worked as it goes
along. If there is no such file on the disk, the computer will
create one. You will then be asked about your running print
requirements. You have the option of printing the logged contacts
and/or just the calls (as you enter them) as you go along. Reply
with the CAPITAL letters please as in the examples below.
Enter name of lOG file (D:NAME) Log type .LOG Assumed ? FIELD85
Do you want a running log printed out (Y/N) ? Y
Do you want CALL SIGNS printed out (Y/N) ? Y
If the log file is new, the computer will prompt you to enter the
Mode, Band and after a short pause, it will request you to enter
the Transmitter Power information before getting down to the
contest.
If you are loading an existing file, after a break for example,
the computer will load the check list from the log file and
display the calls as it goes along. When the log is loaded, the
computer will pause and wait for you to touch the 'ENTER' key
before setting up the main screen. A typical example from the
FIELD85 log is shown below.
166 G4NWG 54019
167 G4TSH 55024
168 G4OVF 57001
169 G4EKT/P 55592
170 DF0WB/P 53
Waiting,touch ENTER to continue ?
You can see the entry number, followed by the call sign of the
station worked and lastly the report received. The remaining
data in the log file associated with each contact is there but is
not displayed at this time.
When the program begins a new contest log, you will be presented
with the following screen.
PC-HAM CONTEST.DOC Version 3.3 PAGE 5
G3ZCZ CONTEST LOGGING PROGRAM VERSION 3.3 DUMMY
-------------------------------------------------------------
--------------------------------------------------------------
CURRENT ENTRY
1 90/01/06 0331 ? 20 SSB 100 00 59 - -
QRU ?
The top line contains the version of the program and displays the
name of the disk file you are using as the log. It is recommend-
ed that the name be somewhat representative of the contest. Use
names such as WPX87, ARRLDX86, FIELD85 and so on.
The blank area following is where the last few contacts you made
will be displayed. You thus have an ongoing display of the last
contacts . It is very useful to see how you are doing and in the
Worked All Europe contest you can use that data for the QTC
information (if you are located outside Europe). The call stack
will be shown overlaying this window.
The lower part of the screen contains the CURRENT ENTRY data.
This is the data concerning the contact in progress. In this
case the next contact is the first or number 1, and the call data
is blank because nothing has been entered.
As you work the contest you will pick up information from other
stations. This information will consist of call signs and re-
ports. In some contests (eg. The ARRL Sweepstakes) the report is
relatively complex, in others it is simple. You do not know in
which order you will get the data for each contact. This program
thus lets you enter the data in any order. You tell the computer
which piece of data is going to be entered by typing a single
letter followed by the 'ENTER' key.
In order to speed up that operation, the function keys have been
set up with those commands, and are displayed during the contest
for your convenience.
PC-HAM CONTEST.DOC Version 3.3 PAGE 6
3.0 COMMANDS
The contest logging program gives the operator the following
choices. If you do not wish to use the function keys, you have to
type the first letter followed by the 'ENTER' key.
3.1 GRAB (Function Key 1)
This command allows you to grab a call of the stack. When
you touch the F1 key, you will be prompted for a number.
Enter the number shown next to the callsign in the stack
window and that call will be grabbed. This feature allows
you to tune past a station and return to it, entering the
call as you go, an not having to reenter it later.
3.2 Band (Function Key 2)
Enters the band information for the checklist and log. Use
the following designations for the different bands, 160, 80,
40, 20, 15, 10, 6, and 2.
NOTE, changing the band will clear the call and report data
elements form the display.
3.3 CALL (Function Key 3)
Enters the Call of the station to be or being worked. When
the call is entered, the computer will perform a check to
see if that call has already been worked and if so on
what band. If the call has been worked on the band in use
at that time it will also display the word DUPLICATE and
BEEP an audible alarm. The beep is a must at 0330 hours
local time.
If you change your mind, type the 'ENTER' key and the call
in the display will not be changed.
3.4 *QRT (Function Key 4)
This command terminates the program. It saves the data
associated with the last 12 contacts in a file with the
".CHK" extension so that when the program is restarted,
the operator will not even notice that a break occurred.
The disk files are closed and any previous log file present
from the start of the session is named as a backup file.
Since you have the potential to lose a number of QSO's
(while recovering) if you invoke this command by mistake,
the computer will ask you to verify that you meant to do
what you just asked for. You will be prompted to confirm
your request with the following message.
ARE YOU SURE ?
At this time, type the letter Y for "YES" followed by the
PC-HAM CONTEST.DOC Version 3.3 PAGE 7
'ENTER' key if you want to got QRT for a while, or if the
contest is over. Any other key will abort the sequence.
3.5 RPT RX (Function Key 5)
Enter the Report received into the log.
3.6 Fudge (Function Key 6)
This command is used to flag an erroneous log entry. Since
the log on disk is a sequential file, and the log data is
not double buffered by the program, once an entry is written
to the log, it is gone. This command deletes the call from
the list checklist and puts a "/*" entry into the logbook.
Since you have the potential to delete a QSO if you invoke
this command by mistake, the computer will ask you to verify
that you meant to do what you just asked for. You will be
prompted to confirm your request with the following message.
ARE YOU SURE ?
At this time, type the letter Y for "YES" followed by the
'ENTER' key if you want to fudge the last contact. Any
other key will abort the sequence.
3.7 XMT RPT (Function Key 7)
Enter the signal report Xmitted to the other station into
the log.
3.8 /PX CHK (Function Key 8)
This command is used to scan the contents of the check
list for prefixes. You use this when you are sure that
you have worked a station but the computer tell you that
you haven't. You may also use it to check if a prefix has
been worked as a help in deciding if you want to get into a
pile up or pass it by. NOTE however that the response is
not instantaneous. It takes a few seconds to scan the
4000 slots in the check list. The computer will prompt you
to enter a prefix. If you want to look at all the calls in
the check list, enter an asterisk (*) as the desired prefix
and you will get a list of every call in the check list in
the order in which they are hashed in the check list.
3.9 LOG (Function Key 9)
Enter the QSO information into the Log book/check list. The
data is written into the log file in ASCII format delimited
with commas. This makes it easy to modify with a word proc-
essor and read into the program used by the second computer.
You may also list the contents of the log file to the screen
under DOS using the "TYPE" command.
PC-HAM CONTEST.DOC Version 3.3 PAGE 8
Logging a contact clears the call and updates the time data.
THE COMPUTER WILL NOT LET YOU LOG THE QSO UNTIL YOU HAVE
ENTERED BOTH A CALL SIGN AND A REPORT. This traps one type
of error that can be made in the heat of the moment.
3.10 +MORE (Function Key 10)
This command switches sets of function keys.
3.11 WATTS (Function Key 1)
Enter the Transmitter Power used in Watts into the log-
book.
3.12 MODE (Function Key 2)
Enter the Mode used in the contest in the log. You may
enter anything, but the most commonly used ones are SSB and
CW.
3.1 3 ?CLN (Function Key 3)
This command clears the screen dialogue lines. It is nor-
mally used rarely, only in the event that the BASIC inter-
preter generates an error message in response to a user
input. The typical one normally seen is "REDO FROM START"
which results from an alphabetical response to the BAND
interrogation, where BASIC is looking for a number, not a
string.
3.14 PRINT (Function Key 4)
This command allows you to turn the printer on and off.
3.15 OOPS (Function Key 5)
This command is used after some catastrophe in which the
numbers have gotten out of sequence. You use it to add a
number to the one displayed on the screen.
4.0 AFTER THE CONTEST
When the contest ends, or you take a break, the computer will
close out the log and 'CHK' files and ask you if the contest is
over. The following messages will be displayed.
SAVING LAST ENTRY STRINGS BEFORE CLOSING
Is the contest over (Y/N) ?
If you reply with the letter N for NO, the program will end. If
the contest is over, and you reply with the letter Y, the program
will proceed to process the contest log data. It will delete
entries flagged for deletion and optionally will number the
contacts in the comments column. The program prompts for in-
PC-HAM CONTEST.DOC Version 3.3 PAGE 9
structions as to the number option as follows.
CONVERTING (CLEANING UP) CONTEST LOG TO STANDARD LOG
Do you want the contacts numbered (Y/N) ? N
The computer will put a dummy entry into the first position of
the log identifying the contest. It will thus request you to
give it the name of the contest. You must use a name that con-
tains 10 or fewer characters. The questions is posed as follows.
What is the name of the contest ? FIELD85
The program first generates a reference entry for the contest
log. It then reads each line of log information, strips the
report part from the comments and puts it into the report space
and if it as been so instructed, adds the serial number of the
contact into the comments space. When the program has done its
job, the original log has been renamed with a ".RUN" file
extension while the converted log data file has the extension
".LOG".
The computer generates a running display as the data processing
job proceeds, a typical example of which is shown below.
85/09/08 -CONTEST SSB FIELD85
85/09/07 1646 G4ANT/P 20 59 59 SSB 200 - - 064
85/09/07 1647 DF0KD/P 20 59 59 SSB 200 - - 131
85/09/07 1648 G4AAX/P 20 59 59 SSB 200 - - 086
85/09/07 1649 YU4EXC/P 20 59 59 SSB 200 - - 198
85/09/07 1651 DF0SSB/P 20 59 59 SSB 200 - - 160
85/09/07 1659 G3WAS/P 20 59 59 SSB 200 - - 089
85/09/07 1703 YU4EZC/4 20 59 59 SSB 200 - - 219
-------
85/09/08 1305 G4NWG 15 54 53 SSB 200 - - 019
85/09/08 1306 G4TSH 15 55 59 SSB 200 - - 024
85/09/08 1307 G4OVF 15 57 53 SSB 200 - - 001
85/09/08 1323 G4EKT/P 20 55 59 SSB 200 - - 592
85/09/08 1330 DF0WB/P 20 53 53 SSB 200 - -
10 Entries were corrected/deleted
OK
Note that the date is set to the date at the end of the contest,
not the date at the start of the contest. When the job is over,
you will be shown how many entries were corrected or deleted.
You may examine the log with a word processor (non-document mode
please), or better still APPEND it to the PC-HAM DBASE3 logging
package for further processing. Since the logging package
processes the data so well, a program in BASIC to display the log
was deemed unnecessary.
5.0 SAMPLE DISK FILES
The following sample files of an extract from the 1985 Field
PC-HAM CONTEST.DOC Version 3.3 PAGE 10
Day contest log are presented on the disk as an aid to
understanding the operation of the CONTEST package.
FIELD85.RUN As run log of contest.
FIELD85.LOG Log, ready for conversion to .DBF format.
FIELD85.CHK Last few entries in log.
FIELD85.DBF Log, in DBASE2 data base format.
FIELD85.NDX Index file for DBASE2 log database.
